Raymarine GyroPlus Yaw Sensor Einstellungsanleitung PDF herunterladen (Seite 21)

Chapter 2: Using Track mode

2.1 Overview

Your SPX-5R Drive system provides a Track mode, to enable you to automatically

follow a route (or track), set on your chartplotter or GPS.

A track is a predefined path through a series of waypoints with each “track leg” being

a straight line between 2 consecutive waypoints.

In Track mode, the SPX-5R Drive system will make any course changes necessary to

keep your boat on the required track, and automatically compensate for tidal streams

and leeway.

Requirements for Track mode

To operate in Track mode, the SPX-5R Drive system must receive route information

from a suitable navigation system, such as:

• A SeaTalk compatible chartplotter or GPS unit.

• An NMEA 0183 or NMEA2000 compatible chartplotter or GPS unit.

•A SeaTalk

compatible chartplotter.

Refer to the SmartPilot X-5R Drive Installation & Commissioning Guide for

connection details.

Starting position and heading

Before entering Track mode, ensure that the boat is as close as possible to the actual

track and course heading (see Track keeping & Cross Track Error on page 17.). When

you enter Track mode, the SPX-5R Drive system will steer the boat onto the required

track.

Track leg

Waypoint

D10915-1

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Keine Kommentare

Raymarine GyroPlus Yaw Sensor Einstellungsanleitung Seite 21