Raymarine GyroPlus Yaw Sensor Einstellungsanleitung PDF herunterladen (Seite 19)

Chapter 1: Basic Operation 13

Accessing response setup

You can access the User calibration mode only from Standby mode, so to set the

response level:

1. Ensure the SPX-5R Drive system is in Standby mode, then hold down

standby

for 2 seconds. The display will change to show

DISPLAY CAL

2. Press

disp

once. The display will now show

USER CAL

3. Press

auto

to enter User calibration.

The Response setup page is displayed.

4. To access other User calibration pages, press

disp

to scroll through the

calibration functions (described below).

5. Use the -1, +1, -10 and +10 buttons to change the value of each function you want

to change.

6. When you have made all the changes you want to make, hold down

standby

for

two seconds to exit calibration mode and save changes.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Keine Kommentare

Raymarine GyroPlus Yaw Sensor Einstellungsanleitung Seite 19