Raymarine 425 Spezifikationen PDF herunterladen (Seite 59)

Chapter 3: Operation 3-33

Figure 3-51: Track Set Up Options

The following instructions assume that the track functions are displayed.

Setting up a Track

Use the track functions to switch the track on and to specify the interval at

which track points are placed. The time interval between track points can

be set to 1s, 10s, 30s, 1min, 10min or 30 minutes. The distance spacing

between track points can be set to 0.05nm, 0.1nm, 0.5nm or 1nm. The

maximum track length is 2000 points. When this limit has been reached,

track points continue to be placed, but the oldest points start to be deleted.

Track points continue to be placed until the track is switched off. The

current track is retained even when the unit is powered off.

Setting a short time interval between track points is best suited to

navigation within a close or complex environment, eg. an estuary or

marina whereas, in contrast, a greater distance interval is best suited to a

long haul voyage.

When complete, a track can be converted to and saved as a route

(SmartRoute).

Refer to the track interval setting guide (Figure 3-52) to determine the

best setting for your planned voyage; this is particularly important if you

wish to use SmartRoute to convert the track to a route.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 113 114

Keine Kommentare

Raymarine 425 Spezifikationen Seite 59