Raymarine 425 Spezifikationen PDF herunterladen (Seite 34)

3-8 Raychart 425 Chartplotter

➤ To delete a waypoint using the waypoint list:

1. Select the waypoint from the waypoint list as previously described.

The waypoint list function bar is displayed.

2. Use trackpad up/down to move through the list to highlight the

required waypoint.

3. Select

ERASE WAYPOINT. Press ENTER to erase the waypoint.

To return to chart mode, press

CLEAR three times.

Moving Waypoints

Any waypoint, except the target waypoint, can be moved. The Waypoint

function bar and cursor are used to move the selected waypoint, or the

waypoint position can be edited.

Note: Take care when editing waypoints as it is possible to move way-

points that are used in routes stored in the Route Database List.

➤ To move a waypoint using the cursor:

1. Place the cursor over the waypoint; see Selecting a Waypoint on

page 3-4.

2. Select

WAYPOINT OPTIONS and press ENTER to display the Edit Way-

point function bar.

3. Select

MOVE WAYPOINT. The selected (highlighted) function now has

help text appended to it (Figure 3-15):

Figure 3-15: Move Waypoint Function

4. Move the cursor to the required waypoint position.

5. When the cursor is in the correct position, press

ENTER to set the new

position and return to normal cursor control.

To return to chart mode, press

CLEAR.

➤ To move a waypoint using the Waypoint List:

1. Select the waypoint using the Waypoint List as described above. The

waypoint functions are displayed.

2. To edit the waypoint position proceed as previously described in

Editing Waypoint Details on page 3-5.

3.3 Working with Routes

A route is made up of a series of waypoints (maximum 50). A route is

made by placing a series of waypoints on the chart.

CURSOR SELECT POS, "ENTER"

MOVES WPT, "CLEAR" TO QUIT

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 113 114

Keine Kommentare

Raymarine 425 Spezifikationen Seite 34