Raymarine ST3000 Spezifikationen PDF herunterladen (Seite 46)

42 ST3000 Wheel Drive Autopilot - Owner’s Handbook

4 Installing the Wheel Pilot

Mounting the socket

To mount the SeaTalk socket:

1. Fix the template (supplied at the end of the handbook) onto the

bulkhead at the selected socket location

2. Carefully drill the 18 mm (

in) clearance hole and 2.4 mm

(

in) pilot holes, then remove the template.

3. Fit the plug cap to the socket body.

4. Locate the O-ring seal into the groove between the plug cap and

socket body.

5. Cut and strip back the power cables and SeaTalk cables (if fitted).

6. Thread both cables through the bulkhead hole and connect to the

relevant pins on the socket.

7. Attach the socket to the bulkhead using the two self tapping

screws supplied.

8. Secure the cables to the bulkhead.

D5634-1

Screen

(Sea Talk 0 V)

Red

(+12 V)

Yellow

(Sea Talk

Data)

Black

(Supply 0 V)

Identification

Stripes

To SeaTalk

To power supply

81194_1.book Page 42 Wednesday, July 25, 2001 12:10 PM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Keine Kommentare

Raymarine ST3000 Spezifikationen Seite 46