Raymarine ST3000 Spezifikationen PDF herunterladen (Seite 51)

Chapter 4: Installing the Wheel Pilot 47

4 Installing the Wheel Pilot

7. Bolt the mounting clevis into position with the fixing bolts

positioned mid-way in the elongated holes. This will ensure that

the belt is taut when you rotate the clutch lever fully clockwise to

tension the belt.

8. Re-assemble the complete drive system and then check the clutch

operation. If necessary, reposition the clutch lever on the splined

eccentric bush to ensure that the lever can rotate 180° without

obstruction.

9. Check the belt tension:

• when the belt is tensioned by rotating the clutch lever fully

clockwise, you should be able to back-wind the drive unit by

slowly rotating the wheel. If belt slip occurs, increase belt

tension by reclamping the clevis in a slightly lower position.

• when the clutch lever is rotated fully anti-clockwise the wheel

drum should slip easily against the belt

• do NOT over tighten the belt

Drive unit cabling

Plug the drive unit cable into the socket on the underside of the

ST3000 control unit.

D5641-1

81194_1.book Page 47 Wednesday, July 25, 2001 12:10 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

Keine Kommentare

Raymarine ST3000 Spezifikationen Seite 51