Raymarine RayTech RNS 5.0 Bedienungsanleitung PDF herunterladen (Seite 29)

Interfacing RNS 25

Interfacing RNS

Introduction

This section shows you how to connect various instruments and devices that can

interface with RNS with systems that use:

• NMEA devices.

• SeaTalk devices.

•hsb

devices.

Connecting RNS to your instruments

The connection between the PC that is running RNS and your instruments is achieved

using a 9-pin cable, Raymarine Part No. E86001. One end connects directly to your PC’s

Serial Port, the other to the various devices.

Connecting directly to a GPS

Connecting RNS to a Global Positioning System (GPS) is the simplest way to get

position data.

To connect RNS directly to a GPS:

1. Verify that GPS NMEA output is turned ON.

2. Set the GPS datum to WGS84.

3. Using Raymarine Cable Part No.E86001, connect the cables as follows:

Cable color GPS lead

Yellow (Rx) NMEA + output

may also be labelled Tx, Tx+, Data out +, or NMEA OUT +.

Black (SGnd) Not used

Green (Tx) Not used

Black (SGnd) NMEA - output

may also be labelled TX-, Data out-, NMEA- out, or Ground

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Keine Kommentare

Raymarine RayTech RNS 5.0 Bedienungsanleitung Seite 29