
8
Set time format.
To set the required time format:
1. At the
Time & Date
setup menu, use < and > to select the
Time Format
option, then
press
ENTER
, to display the
Set time format
page.
2. Use < and > to select the required Time Format, then press
ENTER
, to save the
format and return to the
Time & Date
setup menu.
Set local time
To set the pilot controller time to your local time:
1. At the
Time & Date
setup menu, use < and > to select the
Set time offset
option,
then press
ENTER
, to display the
Set time offset
page.
2. Use < and > to set the correct local time. For example, if your local time is 1 hour
after GMT, set
+1
, then press
ENTER
, to save the setting and return to the
Time &
Date
setup menu.
Leaving date & time setup
When your date and time formats and values are set as required:
1. Display the
Time & Date
setup menu.
2. Use < and > to select the
Continue
option.
3. Press
ENTER
, to proceed to the
Units
summary page which shows the units
currently in use.
Data units
You can set the units you want to use for displaying
data. You can set:
• Speed: miles per hour, kilometers per hour or
knots.
• Depth: feet, fathoms or meters.
• Distance: either miles, nautical miles or
kilometers.
• Wind speed: knots or meters per second.
• Heading: magnetic or true.
• Temperature: degrees Celsius or degrees Fahrenheit.
• Flow rate: gallons per hour or liters per hour.
• Number of engines from 1 to 5.
• No of batteries from 1 to 5.
• Pressure: pounds per square inch, bar, or kilo pascal.
• Volume: liters, UK gallons or US gallons.
• Number of fuel tanks from 1 to 5.
When you are ready to proceed:
1. Press
ENTER
to display the second
Units
summary page.
2. Press
ENTER
again, to display the
Units
menu.
D9439-1
i
Speed KTS
Distance NM
Depth FT
Wind Speed
KTS
Heading M
These are your current settings.
Units
Press ENTER to continue
Flow Rate
G/H
Temperature
C
o
81287_1.book Page 8 Tuesday, March 18, 2008 11:50 AM
Kommentare zu diesen Handbüchern