Raymarine autopilot control unit Bedienungsanleitung PDF herunterladen (Seite 23)

ST7000 Plus Autopilot Control Unit Owner’s Handbook

Return to Hand Steering

To disengage the Autopilot and return to Standby, press standby.

• The ST7000 Plus returns to Standby mode with the display

showing the vessel’s current compass heading.

• The previous autopilot heading is memorised and can be recalled

(see Returning to Previous Locked Heading for details).

Changing Course

There are two methods for changing to a new course. You can either:

• Set a new course directly (in Auto Mode)

• Set up the course you want (in Auto or Standby Mode) and apply it

at a specific time (e.g. to make a course change at a predetermined

time or location), after confirming that you have set the correct

course and the direction of turn is correct.

In both cases, the +1 and +10 (starboard) and –1 and –10 (port) keys

are used to change the locked heading, in increments of 1° and 10°.

To set a new course directly, in Auto Mode, use the +1 and +10

(starboard) and –1 and –10 (port) keys as appropriate, to set the

heading you want. The autopilot will turn on to the new course

immediately it is set.

Example: a 30° course change to port = press –10 three times.

To set a new course and apply it at a predetermined time or location:

1. Press set crs. The SET COURSE screen is then displayed.

2. Use the +1 and +10 (starboard) keys or the –1 and –10 (port) keys

as appropriate to set the heading you want. The autopilot will not

accept the new heading at this stage.

118ch02.p65 07/01/99, 12:416

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 110 111

Keine Kommentare

Raymarine autopilot control unit Bedienungsanleitung Seite 23