Raymarine 425 Spezifikationen PDF herunterladen (Seite 4)

4 RS125 GPS Receiver

Red (12 V /+)

Yellow (SeaTalk input/output / +)

Brown (RTCM in / +)

Green (connect with Red 12V wire/ +)

Shield (0 V/ground / -)

To connect to SeaTalk....

Note: If the Brown (RTCM) wire is not used, it must be suitably grounded to 0 Volts.

If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse should be

fitted to the positive (red) lead of the cable.

Red (12 - 32 V /+)

Yellow (NMEA out /+)

Brown (RTCM in /+)

Green (NMEA in /+)

Shield (0V/ ground / -)

To connect to NMEA 0183....

NMEA sentences

Output sentences:

GPGGA, GPGSA, GPGSV, GPGLL, GPRMC, GPDTM, GPGNS, GPVTG, PRAYA

Input sentences:

PRAYI, PRAYE, PRAYA

Note: If the Brown (RTCM) and Green (NMEA in/+) wires are not used, they must be

suitably grounded.

If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse should be

fitted to the positive (red) lead of the cable.

To connect the RS125 using Scotchlok connectors....

Using suitable wire clippers, remove the tinned

ends from the individual cables. Leave the

insulation intact.

Place the wires to be joined into the connectors,

ensuring correct polarity and that the wires are

fully pushed home.

Using a pair of pliers, crimp the connector bulb

together ensuring that a secure connection has

been made.

Ensure the cables are secured in a suitable

position to prevent the joint being placed under

strain.

D7474_2

81247_4.fm Page 4 Monday, September 15, 2008 4:58 PM

1 2 3 4 5 6 7 8

Keine Kommentare

Raymarine 425 Spezifikationen Seite 4