Raymarine ST70 Instrument Installationsanleitung PDF herunterladen (Seite 13)

Chapter 2: Planning 5

2.2 Positioning the ST70 instrument

CAUTION: Instruments must be placed a safe distance from equipment

that could adversely effect their performance. Refer to the EMC

guidelines on

page v

• There must be sufficient space to mount the instrument.

• The connection point should be within 400mm of the install location (unless you

are using an extension cable). In a SeaTalk

network, the connection point will be

a T-piece or connector block on the backbone cable, or another ST70 instrument;

on SeaTalk, the connection point will be an existing instrument, or a connector

block on the system.

• Any holes cut to mount the instrument must not compromise the vessel’s struc-

ture.

D10400-1

ST70 dimensions

24 mm

(0.95 in)

24 mm

(0.95 in)

6.5 mm

(0.25 in)

Surface

mount

Flush

mount

110 mm (4.33 in)

104 mm (4.1 in)

115 mm (4.53 in)

90 mm (3.54 in)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Keine Kommentare

Raymarine ST70 Instrument Installationsanleitung Seite 13