Raymarine ST60 Spezifikationen PDF herunterladen (Seite 30)

18 ST60 Speed Instrument Owner’s Handbook

CAUTION:

It is essential that only screws of the correct size are used to

secure the instrument to the bezel. Failure to observe this caution

could result in damage to both the instrument and the bezel.

5. Using the four, self-tapping screws (9) provided, secure the instrument and

bezel together. Fit the screws from the rear of the instrument and tighten

them sufficiently to secure the instrument and bezel together. DO NOT OVER-

TIGHTEN.

Flush mounting procedure

Flush mount your instrument (see the

Flush mounting

illustration) as follows:

1. Assemble the ST60 instrument and low-profile bezel as described under

Fit-

ting the low-profile bezel

2. Ensure that:

• The panel on which you intend to mount the instrument is between

0.12 in (3 mm) and 0.78 in (20 mm) thickness.

• The selected location is clean, smooth and flat.

• There is sufficient space behind the selected location to accommodate the

rear of the instrument and connectors.

D4360-2

789

Fitting the low-profile bezel

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Keine Kommentare

Raymarine ST60 Spezifikationen Seite 30