Raymarine Rudder Spezifikationen PDF herunterladen (Seite 27)

Chapter 3: Installation 17

If you are fitting an ST60+ Rudder Angle Indicator instrument as part of a system

which includes a SeaTalk autopilot, the transducer must be connected directly to

the autopilot. The ST60+ Rudder Angle Indicator will then act as a slave to the

autopilot.

Rotary Rudder Reference Transducer

Mounting

1. Ensure that the base height of the Rotary Rudder Reference Transducer is such

that it is able to maintain the correct vertical alignment between the trans-

ducer and tiller arm (as shown).

2. Using Rotary Rudder Reference Transducer template (supplied at the rear of

this handbook), mark the centers for the three securing screws at a suitable

location adjacent to the rudder stock.

3. Drill out the three 3 mm holes then, using the three self-tapping screws pro-

vided, secure the Rotary Rudder Transducer in position.

Note:

To ensure precise rudder position indication, the Rotary Rudder Reference Trans-

ducer incorporates a spring to remove any mechanical backlash in the tiller linkage.

139.7mm (5.5in)

152mm (6in)

69.5mm (2.7in)

61mm (2.4in)

D4426-1

Rotary Rudder Reference Transducer - dimensions

D4427-1

Vertical alignment of transducer and tiller arm

Tiller arm

Transducer

Mounting base

81266_1.book Page 17 Monday, December 5, 2005 9:28 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Keine Kommentare

Raymarine Rudder Spezifikationen Seite 27