Raymarine ST50 plus Bedienungsanleitung PDF herunterladen (Seite 12)

ST50

Plus Tridata and Repeater Operation and Installation Handbook

Chapter 3: Fault Finding and Maintenance

3.1 Fault Finding

All

Autohelm

products are, prior to packing and shipping, subjected to

comprehensive test and

quality

assurance programmes. However, if a fault

arises with the ST50 Plus Tridata, the following table will help to identify the

probable cause and provide the most likely cure.

Fault

Cause

Action

instrument display

blank.

No supply. Check supply.

Check cabling

and

security of SeaTalk

connectors.

Check fuse/breaker.

Return unit for repair.

Instrument displays

‘CODE SET

The ‘Code Lock’ feature Enter correct code

has been set. number.

No speed or

temperature

information.

Transducer cabling

problem.

Check cabling and

security of transducer

connector.

No speed information. Transducer

paddlewheel fouled.

SeaTalk cabling

problem.

Clean paddlewheel.

No exchange of

information between

SeaTalk instruments.

Check security of

SeaTalk connectors.

Disconnect instruments

one by one to isolate

faulty unit.

Failure of a group of SeaTalk

instruments in SeaTalk cabling/connector

chain. problem.

Check security of

SeaTalk connectors

and non-functioning

units.

Depth reading flashes Transducer Check cabling and

continuously (depth

cable/connector

security of transducer

greater than 3 feet). problem. connector.

Depth reading flashes Aerated water Normal reading will

while underway. Boat wakes

return when clear of

Prop wash etc.

disturbed water.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Kommentare zu diesen Handbüchern

Ff 27 Mar 2025 | 12:48:45

Notice st50

Raymarine ST50 plus Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Raymarine ST50 plus