Raymarine 465 Spezifikationen PDF herunterladen (Seite 30)

20 RC435 and RC435i Chartplotters

2.6 System Check and Initial Switch On

When installation is complete and all connections have been made, re-

check the installation before using the system for navigation. If problems

occur, refer to Chapter 6:Maintenance & Troubleshooting.

EMC Conformance

Always check the installation before going to sea to make sure that it is

not affected by radio transmissions, engine starting, etc.

System Check

Before performing the functional test, check that:

• All connections are clean and tight.

• All cables are secured and protected.

Initial Switch On

To switch on the chartplotter, press the POWER key.

If necessary, adjust the lighting and contrast (see Chapter 4).

If desired, change the default language settings as follows:

1. Press the PAGE key to display the setup function bar.

2. Using trackpad left/right, select the SYSTEM SET UP function and press

ENTER. The SYSTEM SET UP menu is displayed, listing the parameters

and their current settings:

81236_1.book Page 20 Monday, January 5, 2004 3:41 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 131 132

Keine Kommentare

Raymarine 465 Spezifikationen Seite 30