Raymarine SmartController Betriebsanweisung PDF herunterladen (Seite 33)

User Guide 33

Fault finding

All Raymarine products are designed to provide many years of trouble-free

operation. We also put them through comprehensive testing and quality

assurance procedures before shipping.

If a fault occurs with your SmartController, use the fault finding tables in this

section to help identify the problem and provide a solution. If you cannot

resolve the problem yourself, refer to the product support information.

ROUTE COMPLETE This sounds on the completion of a track. Press

PILOT to continue on the same heading or

STANDBY for manual control.

SHIPS BATTERY The ships battery voltage has dropped below

acceptable limits, replace the batteries.

WAYPOINT ADVANCE You have arrived at a waypoint on your route.

The autopilot is now requestiong permission to

turn onto the next leg, press PILOT to accept.

SYMPTOM POSSIBLE CAUSE and SOLUTION

Display is blank

No power – press

C to power up the SmartCon-

troller or charge the batteries.

Autopilot not responding. Drive the boat for 30 seconds at above 2.5kts

and retry.

Check autopilot connections.

Boat turns slowly and takes a

long time to come onto course

Rudder gain too low. Complete AutoLearn or

increase gain setting.

Boat overshoots when turning

onto a new course

Rudder gain too high. Complete AutoLearn or

decrease gain setting.

Position information not

received

Navigator not transmitting the correct position

data.

The pilot will not auto advance to

the next waypoint.

No bearing to waypoint information received

from the navigator.

ALARM MESSAGE POSSIBLE CAUSE and SOLUTION

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Keine Kommentare

Raymarine SmartController Betriebsanweisung Seite 33